LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Cruze Premier, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Repair Instructions - On Vehicle >> Automatic Transmission Flex Plate Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM4199148Courtesy of GENERAL MOTORS COMPANY

    Automatic Transmission Flex Plate (1) - Install

    2. NOTE:

    Install NEW bolts.

  2. Automatic Transmission Flex Plate Bolt (2) - Install [8x]
  3. GM4199147Courtesy of GENERAL MOTORS COMPANY

    Install the EN-652  holder (1) in order to fix the flex plate.

  4. Tighten the flex plate bolts crosswise in the following order:
      CAUTION:

      Fastener Caution

      CAUTION:

      Torque-to-Yield Fastener Caution

    2. First Pass: 60 N.m (44 lb ft)
    3. Final Pass: 45 degrees - EN-45059  meter
  5. Remove the EN-652  holder.
  6. Transmission Replacement - Install
scientia non olet · About LEMON Manuals