Valve Lifter Installation

WARNING: This page is about a different variant/trim than selected.

Coat the 16 valve lifters with engine oil.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Clip in the valve lifter to the valve lifter roller. Mind to the centering link on retainer spring (3).

Install the 16 valve lifters (2) to the valve lifter roller (1).
Courtesy of GENERAL MOTORS COMPANY

NOTE:
If the valve lifters or valve lifter rollers are reused, the valve lifter or valve lifter roller must be installed in their original position.

Install the 16 valve lifter with valve lifter roller (1) in the order as they was removed.