Turbocharger Wastegate Actuator Pipe Installation
WARNING: This page is about a different variant/trim than selected.
- Install the turbocharger wastegate actuator pipe (2).
- Connect the turbocharger wastegate actuator pipe (2) to the power brake booster vacuum pipe (4).
- Connect the turbocharger wastegate actuator pipe (2) to the turbocharger wastegate actuator (5).
- Install the turbocharger wastegate actuator pipe bracket bolt (3) and tighten to 10 N.m (89 lb in).
- Install the turbocharger wastegate actuator pipe bracket bolt (1) and tighten to 10 N.m (89 lb in).
CAUTION:
Refer to Fastener Caution .