Thermostat Bypass Pipe Installation
WARNING: This page is about a different variant/trim than selected.
- Clean all sealing surfaces.
 Courtesy of GENERAL MOTORS COMPANY
|
Insert a NEW gasket. (2)
- Thermostat Bypass Pipe (3) - Install
- Install the 3 thermostat bypass pipe bracket bolts (5, 6) and tighten to 10 N.m (89 lb in).
- Thermostat Bypass Pipe Bolt (1) - Install and tighten 10 N.m (89 lb in) [2x]
- Clamp (4) - Install [2x]