Fuel Injection Fuel Feed Pipe Installation - Fuel Injection Pump to Fuel Rail

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Fuel Injection Fuel Feed Pipe (2) - Install NEW

NOTE:

Counterhold at the fuel injection pump hexagon connector.

Fuel Injection Fuel Feed Pipe (2) @ Fuel Injection Pump (4) - Install
Fuel Injection Fuel Feed Pipe (2) @ Fuel Rail (3) - Install

NOTE:

Counterhold at the fuel injection pump hexagon connector.

CAUTION:

Fastener Caution

Fuel Injection Fuel Feed Pipe (2) @ Fuel Injection Pump (4) - Tighten 28 N.m (21 lb ft)
Fuel Injection Fuel Feed Pipe (2) @ Fuel Rail (3) - Tighten 28 N.m (21 lb ft)
Fuel Injection Fuel Feed Pipe Bracket Bolt (1) - Install and tighten 9 N.m (80 lb in)