LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Cruze Premier, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Repair Instructions - Off Vehicle >> Compressor Air Intake Turbocharger Installation

Compressor Air Intake Turbocharger Installation

WARNING: This page is about a different variant/trim than selected.
Fig 1: Exploded View Of Turbocharger And Components
GM4537987Courtesy of GENERAL MOTORS COMPANY
  1. Turbocharger Gasket (9) - Install NEW
  2. Position the turbocharger to the turbocharger oil return pipe.
  3. Turbocharger (5) @ Exhaust Manifold - Install
    4. CAUTION:

    Fastener Caution

  4. Turbocharger Nut (1, 8) - Install and tighten [3x] 30 N.m (22 lb ft)
  5. Turbocharger Coolant Feed Pipe Gasket (7) - Install NEW [2x]
  6. Turbocharger Coolant Feed Pipe Hollow Screw (6) - Install and tighten 25 N.m (18 lb ft)
  7. Thermostat Bypass Hose (3) @ Thermostat Bypass Pipe - Connect
  8. Thermostat Bypass Hose Clamp (4) - Install
  9. GM4421776Courtesy of GENERAL MOTORS COMPANY

    Turbocharger Oil Return Pipe Bolt (1) - Install and tighten 10 N.m (89 lb in)

  10. Turbocharger Oil Return Pipe Bolt (2) - Tighten 25 N.m (18 lb ft)
  11. GM4537985Courtesy of GENERAL MOTORS COMPANY

    Turbocharger Heat Shield (3) - Install

  12. Turbocharger Heat Shield (3) @ Clamp (1) - Install
  13. Turbocharger Heat Shield Bolt (2) - Install and tighten [2x] 10 N.m (89 lb in)
scientia non olet · About LEMON Manuals