LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Cruze Premier, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Diagnostic Information and Procedures >> Cylinder Leakage Test >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM4848822Courtesy of GENERAL MOTORS COMPANY

    Install the EN-51110  Compression and Cylinder Leakdown Test Adapter into the fuel injector bore.

  2. Install the EN-35667-A  Cylinder Leakdown Tester to the leakage adapter (1).