Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the engine sight shield. Engine Sight Shield Replacement
- Remove the air cleaner outlet duct. Air Cleaner Outlet Duct Replacement
Turbocharger Wastegate Actuator Pipe (2) @ Turbocharger (1) - Remove
Wiring Harness Clip (4) - Unclip [2x]
- Turbocharger Wastegate Actuator Pipe Bolt (1, 3) - Remove [3x]
- Remove the turbocharger wastegate actuator pipe nut (2).
Turbocharger Wastegate Actuator Pipe (1) @ Power Brake Booster Inlet Hose Connector Fitting (2) - Disconnect
- Turbocharger Wastegate Actuator Pipe (1) @ Vehicle - Remove