Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Courtesy of GENERAL MOTORS COMPANY

Turbocharger Wastegate Actuator Pipe (1) @ Vehicle - Install
Turbocharger Wastegate Actuator Pipe (1) @ Power Brake Booster Inlet Hose Connector Fitting (2) - Connect
Courtesy of GENERAL MOTORS COMPANY

Install the turbocharger wastegate actuator pipe nut (2).

CAUTION:

Turbocharger Wastegate Actuator Pipe Bolt (1, 3) - Install and tighten [3x] 10 N.m (89 lb in)
Tighten the turbocharger wastegate actuator pipe nut (2) to 10 N.m (89 lb in).
Wiring Harness Clip (4) - Install [2x]
Courtesy of GENERAL MOTORS COMPANY

Turbocharger Wastegate Actuator Pipe (2) @ Turbocharger (1) - Install
Install the air cleaner outlet duct. Air Cleaner Outlet Duct Replacement
Install the engine sight shield. Engine Sight Shield Replacement