Removal Procedure
WARNING: This page is about a different variant/trim than selected.
WARNING:
The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death.
WARNING:
WARNING:
CAUTION:
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Remove the engine sight shield. Engine Sight Shield Replacement
Electrical Connector (1) - Disconnect
Fuel Pressure Sensor (1) - Remove and DISCARD