Removal Procedure
WARNING: This page is about a different variant/trim than selected.
WARNING:
The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death.
WARNING:
WARNING:
CAUTION:
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Remove the engine sight shield. Engine Sight Shield Replacement
Clamp (3) - Remove and DISCARD
- Fuel Return Hose (4) @ Diesel Fuel Separator (2) - Disconnect
- Fuel Injector Insulator (1) - Remove
Fuel Injection Fuel Feed Pipe (1) @ Fuel Injection Fuel Rail (3) - Loosen [4x]
- Fuel Injection Fuel Feed Pipe (1) @ Fuel Injector (2) - Loosen [4x]
- Fuel Injection Fuel Feed Pipe (1) - Remove and DISCARD [4x]