LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Cruze Premier, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls And Fuel - 1.6L (LH7) Diesel - Repair Instructions) >> Repair Instructions >> Emission Reduction Fluid Tank Opening Filler Replacement (Notchback) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM4297870Courtesy of GENERAL MOTORS COMPANY

    Emission Reduction Fluid Tank Opening Filler (1) - Install

  2. Connect the 2 emission reduction opening filler quick connectors (2, 3) to the emission reduction fluid tank (4). Plastic Collar Quick Connect Fitting Service 
  3. GM4297869Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Fastener Caution

    Install the 2 emission reduction fluid tank opening filler bolts (1) and tighten to 9 N.m (80 lb in).

  4. Rear Wheelhouse Liner - Right Side - Install - Rear Wheelhouse Liner Replacement
scientia non olet · About LEMON Manuals