Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Before performing the first steps, review the Emission Reduction Fluid and Emission Reduction Fluid Handling .
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Front Compartment Insulator - Remove - Front Compartment Insulator Replacement
Emission Reduction Fluid Exhaust Front Pipe Injector Supply Pipe (1) - Disconnect
- Close the emission reduction fluid exhaust front pipe injector supply pipe (1) with a suitable tool.
- Disconnect the electrical connector. (2)
Emission Reduction Fluid Injector Nut (2) - Remove [2x]
- Emission Reduction Fluid Injector (1) - Remove
- Remove and DISCARD the gasket. (3)