LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Cruze Premier, 4D Hatchback >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Controls And Fuel - 1.6L (LH7) Diesel - Repair Instructions) >> Repair Instructions >> Camshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
  2. Remove the engine sight shield. Engine Sight Shield Replacement
  3. GM4328733Courtesy of GENERAL MOTORS COMPANY

    Disconnect the electrical connector:

    1. Fuel Injection Fuel Rail Fuel Pressure Sensor (1)
    2. Camshaft Position Sensor (2)
  4. GM4328734Courtesy of GENERAL MOTORS COMPANY

    Camshaft Position Sensor Bolt (2) - Remove

  5. Camshaft Position Sensor (1) - Remove
scientia non olet · About LEMON Manuals