Removal Procedure
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Brake Pipe Fitting (1) - Remove [2x]
- Cap the brake pipe fittings to prevent brake fluid loss and contamination.
- Lower the vehicle.
- Dash Upper Extension Panel Opening Cover Replacement - Remove
Radiator Surge Tank Clip (2) - Remove
- Hang out the radiator surge tank (1) without disconnecting the hoses and lay down carefully.
Brake Pipe Fitting (1) - Remove [2x] Cap the brake pipe fittings to prevent brake fluid loss and contamination.
- Cap the EBM brake pipe inlet ports to prevent brake fluid loss and contamination.
Brake Pipe (2)@Retainer (1) - Disconnect [2x]
Brake Pipe (1)@Retainer (2) - Disconnect [2x]
- Brake Pipe - Remove [2x]
WARNING:
Refer to Brake Fluid Irritant Warning .
CAUTION:
Refer to Brake Fluid Effects on Paint and Electrical Components Caution .