Removal Procedure
- Remove the right front tire and wheel assembly. Tire and Wheel Removal and Installation
Front Brake Pipe Fitting (1)@Front Brake Hose (2) - Remove
- Cap the brake hose fitting to prevent brake fluid loss and contamination.
- Cap the brake pipe fitting to prevent brake fluid loss and contamination.
- Dash Upper Extension Panel Opening Cover - Remove - Dash Upper Extension Panel Opening Cover Replacement
Radiator Surge Tank Clip (2) - Remove
- Hang out the radiator surge tank (1) without disconnecting the hoses and lay down carefully.
Brake Pipe Fitting (1) - Remove
- Cap the brake pipe fittings to prevent brake fluid loss and contamination.
- Cap the EBM brake pipe inlet ports to prevent brake fluid loss and contamination.
Brake Pipe (2)@Retainer (1) - Disconnect [2x]
Brake Pipe (1)@Retainer (2) - Disconnect [2x]
- Brake Pipe - Remove
WARNING: