LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2019 >> Corvette Z06, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 6.2L (LT1 LT4 LT5) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Upper Intake Manifold Cover Replacement

Upper Intake Manifold Cover Replacement

GM3416520Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedures 
Remove the left and right side intake manifold covers. Refer to Intake Manifold Cover Replacement (LT1 - Right) Intake Manifold Cover Replacement (LT1 - Left) Intake Manifold Cover Replacement (LT5) .
1 Upper Intake Manifold Cover Fasteners
CAUTION:

Refer to Fastener Caution .


Tighten 
10 N.m (89 lb in)
2 Upper Intake Manifold Cover
Procedure 
  1. Disconnect the manifold absolute pressure sensor electrical connector.
  2. Detach the engine wiring harness from the upper intake manifold cover.
scientia non olet · About LEMON Manuals