Removal Procedure
WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (without KL9)Battery Negative Cable Disconnection and Connection (with KL9)
- Air Cleaner Outlet Duct - Remove - Air Cleaner Outlet Duct Replacement
Disconnect the turbocharger wastegate regulator solenoid valve electrical connector (8) from the turbocharger wastegate regulator solenoid valve (5).
- Remove the 3 turbocharger wastegate regulator solenoid valve hose clamps (2, 4, 6). Hose Clamp Replacement Guidelines - Spring Type
- Remove the 3 turbocharger wastegate regulator solenoid valve hoses (1, 3, 7) from the turbocharger wastegate regulator solenoid valve (5).
Remove the turbocharger wastegate regulator solenoid valve bolt (2).
- Remove the turbocharger wastegate regulator solenoid valve (1).