Engine Mount Replacement

WARNING: This page is about a different car, the 2018 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Callout	Component Name
Preliminary Procedures Air Cleaner Assembly Replacement Engine Support Fixture
1	Engine Mount Nut[3x] CAUTION: Refer to Fastener Caution . Procedure Install NEW engine mount nuts. Tighten to 58 N.m (43 lb ft)
2	Engine Mount Fastener[3x] CAUTION: Refer to Torque-to-Yield Fastener Caution . Procedure Install NEW engine mount bolts. Tighten First pass: 50 N.m (37 lb ft) Final pass: 60 - 75 degrees Special Tool EN - 45059 Angle Meter Equivalent regional tools:Special Tools
3	Engine Mount