Body Lock Pillar Upper Trim Panel Replacement

Preliminary Procedures

1. Disable the SIR system. Refer to SIR Disabling and Enabling .
2. Remove the luggage shade. Refer to Luggage Shade Replacement (Buick) Luggage Shade Replacement (Chevrolet) .
3. Remove the rear seat lower anchor plate bolt on the side of the trim panel being replaced.. Refer to Rear Seat Belt Retractor Replacement .

Procedure

1. Grasp the top of the upper trim panel and gently pull the panel away from the body to release the retainers.
2. Route the rear seat retractor side belt through the opening in the body lock pillar upper trim panel.