LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Traverse LT, FWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Driver or Passenger Seat Removal and Installation

Driver or Passenger Seat Removal and Installation

GM4195237
Callout Component Name
WARNING:

Refer to SIR Warning .

Preliminary Procedures

  1. Disable the SIR system. SIR Disabling and Enabling .
  2. Disconnect the seat belt from the tensioner. Front Seat Belt Retractor Replacement
1 Driver or Passenger Seat Bolt [4x]
CAUTION:

Fastener Caution .


Procedure 
Adjust the seat to gain access to the bolts.
Tighten 
45 N.m (33 lb ft)
2 Driver or Passenger Seat

Procedure

  1. Disconnect the electrical connector.
  2. With the aid of an assistant, remove the front seat.
  3. Enable the SIR System. SIR Disabling and Enabling .