Stator Shaft Support Removal
WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Cadillac Escalade ESV, and 2018 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Input Shaft Support Bolt [12x] Procedure Remove and DISCARD the bolts. |
| 2 | Stator Shaft Support Procedure Using a paint pen, mark the Stator Shaft Support and Transmission Case for orientation during installation. Special Tools DT-45053 Universal Clamp Press Equivalent regional tools:Special Tools |