Special Tools
WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Cadillac Escalade ESV, and 2018 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
| Illustration | Tool Number/Description |
|---|---|
| DT-8092 GE-8092 J-8092 Driver Handle |
|
| DT-03289-20 J-3289-20 Holding Fixture (Base) |
|
| DT-21366 J-21366 Converter Holding Strap |
|
| DT-26941 J-26941 Bushing and Bearing Remover |
|
| DT-36850 Transjel Lubricant |
|
| DT-38416-B Harmonic Balancer Remover |
|
| DT-45000 J-45000 Seal Remover |
|
| DT-45053 Universal Clamp Press |
|
| DT-45096 J-45096 Transmission Oil Cooling System Flush and Flow Test Tool |
|
| DT-45096-30 J-45096-30 Transmission Cooler Flusher Adapters |
|
| DT-45096-40 J-45096-40 Transflow Oil Fill Adapter |
|
| DT-45124 J-45124 Removal Bridge |
|
| DT-45124-9 J-45124-9 Puller Leg |
|
| DT-45201 J-45201 Cooler Line Seal Remover |
|
| DT-46409 Torque Converter Lifting Handles |
|
| DT-47770 Seal Installer |
|
| DT-48989 Holding Fixture |
|
| DT-50648 Case Seal Installer |
|
| DT-50897 Bearing Installer |
|
| DT-50921 Output Carrier Lifter |
|
| DT-51190 Fluid Fill Pan Adapter |
|
| DT-51196 Seal Installer |
|
| DT-51672 Seal Installer |
|
| DT-51892 Press Tool |
|
| DT-52080 One-Way Clutch Aligner |
|
| DT-52081 End Play Gauge Plate |
|
| DT-52086 Piston Return Spring Compressor |
|
| DT-52087 Spacer Plate Alignment Pins |
|
| DT-52088 Turbine Shaft Seal Sizer |
|
| DT-52089 Wiring Harness Connector Remover |
|
| DT-52090 Rotating Shell Assembly Lift Adapter Bar |
|
| DT-52094 Turbine Shaft Small Seal Installer |
|
| DT-52095 Turbine Shaft Large Seal Installer |
|
| DT-52096 Direct Overdrive Sun Gear Shaft Seal Installer |
|
| DT-52429 Torque Converter Fluid Seal Installer |
|
| GE-8001 J-8001 Dial Indicator Set |
|
| J-38869 Seal Installer |
|
| J-39924-1 Torque Converter Fluid Seal Installer |
|
| J-44412 Driver/Seal Installer |
|
| J-45012 Holding Fixture |