LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LT >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Automatic Transmission - 10L80 (MF6) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> Case Extension Assemble (2WD) >> Propeller Shaft Transmission Flange Fluid Seal Installation

Propeller Shaft Transmission Flange Fluid Seal Installation

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Cadillac Escalade ESV, and 2018 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Propeller Shaft Transmission Flange Fluid Seal
GM4738754Courtesy of GENERAL MOTORS COMPANY
Propeller Shaft Transmission Flange Fluid Seal Installation

Callout Component Name
1 Propeller Shaft Transmission Flange Fluid Seal

Procedure

  • Use a NEW seal.
  • Ensure the groove (a) in the seal faces the 12 o'clock position prior to installation.

Special Tools 
J-38869  Seal Installer
Equivalent regional tools:Special Tools
scientia non olet · About LEMON Manuals