Manual Shift Auxiliary Position Switch Replacement - Steering Wheel (Right Side)

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Cadillac Escalade ESV, and 2018 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Manual Shift Auxiliary Position Switch - Steering Wheel (Right Side)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the right side cruise control switch. Cruise Control Switch Replacement (Cadillac)Cruise Control Switch Replacement (Chevrolet/GMC)
1	Automatic Transmission Manual Shift Auxiliary Position Switch Bolt CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Automatic Transmission Manual Shift Auxiliary Position Switch-Right Side Procedure Disconnect the electrical connector. Ensure the steering wheel manual shift auxiliary position switch is properly seated on the steering wheel during installation.

Callout

Component Name

Preliminary Procedure
Remove the right side cruise control switch. Cruise Control Switch Replacement (Cadillac)Cruise Control Switch Replacement (Chevrolet/GMC)

Automatic Transmission Manual Shift Auxiliary Position Switch Bolt

CAUTION:

Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

Automatic Transmission Manual Shift Auxiliary Position Switch-Right Side

Procedure

Disconnect the electrical connector.
Ensure the steering wheel manual shift auxiliary position switch is properly seated on the steering wheel during installation.