Rear Seat Cushion Frame Replacement (40% Bench)

Fig 1: Rear Seat Cushion Frame (40% Bench)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Rear Seat Riser Finish Cover Replacement Rear Seat Strut Replacement Rear Seat Cushion Cover and Pad Replacement (60/40 Bench)
1	Rear Seat Inner and Outer Recliner Fastener [4x] CAUTION: Refer to Fastener Caution . Tighten 50 N.m (37 lb ft)
2	Rear Seat Riser Outer Fastener [2x] Tighten 50 N.m (37 lb ft)
3	Rear Seat Cushion Frame Procedure Disconnect the recliner cables from the cushion frame and recliner assembly. Disconnect the electrical connector, if equipped. NOTE: Note the routing of the recliner cables for installation.