LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Suburban 3500 HD LS >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension System - Suspension Damping >> Repair Instructions >> Electronic Suspension Rear Position Sensor Link Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Installing Link Rods To Ball Studs Using J 38185
    GM613614Courtesy of GENERAL MOTORS COMPANY
  1. Using the J 38185  hose clamp pliers, install to link rod to the ball stud on the sensor lever and the frame bracket.
  2. Install the ESC sensor to the vehicle. Refer to Electronic Suspension Rear Position Sensor Replacement - Left Side , or Electronic Suspension Rear Position Sensor Replacement - Right Side .
scientia non olet · About LEMON Manuals