Steering Column Electronic Lock Replacement

Fig 1: Steering Column Electronic Lock

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures With the vehicle in accessory mode, remove fuse to unlock the steering column lock control module - Column Lock Wiring Schematics Ensure the steering wheel and the front wheels are in the straight ahead position. Turn Signal Switch Cancel Cam Replacement (Chevrolet/GMC) Turn Signal Switch Cancel Cam Replacement (Cadillac) Turn Signal Switch Replacement (N33, N37) Turn Signal Switch Replacement (N38)
1	Steering Column Electronic Lock Bolt [3x] CAUTION: Refer to Fastener Caution . Tighten 13 N.m (115 lb in)
2	Steering Column Electronic Lock Procedure Disconnect the electrical connector. Program the steering column electronic lock.Control Module References

Callout

Component Name

Preliminary Procedures

Steering Column Electronic Lock Bolt [3x]

CAUTION: Refer to Fastener Caution .

Tighten
13 N.m (115 lb in)

Steering Column Electronic Lock

Procedure