Radio Speaker Amplifier Replacement

Preliminary Procedure

1. Remove the quarter lower rear trim panel - left side. Refer to Quarter Lower Rear Trim Panel Replacement (Left Side, Standard Wheelbase)Quarter Lower Rear Trim Panel Replacement (Left Side, Extended Wheelbase) .
2. Remove the two 10 mm M6 bolts retaining the body wiring harness fuse block in the left rear quarter panel structure and reposition the fuse block.
3. Remove the stowage jack assembly and the jack stowage bracket.

Procedure

1. Disconnect the electrical connectors.
2. For programming and set up information, refer to Control Module References .