3rd-4th Gear Shift Shaft Disassemble
WARNING: This page is about a different variant/trim than selected.
Remove the gear unit. Refer to Transmission Disassemble .
- Remove the 3rd-4th gear shift shaft assembly from the gear unit.
- Fix the 3rd-4th gear shift shaft assembly into a vise with a protector.
- Remove the 3rd-4th gear shift fork pin (1) using a pin punch and a hammer.
- Remove the 3rd-4th gear shift fork (2).
- Remove the 3rd-4th gear shift yoke pin (3) using a pin punch and a hammer.
- Remove the 3rd-4th gear shift yoke (4).