LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (M/T Clutch) >> Repair Instructions >> Clutch Master Cylinder Reservoir Hose Replacement (Right Hand Drive) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM4010465Courtesy of GENERAL MOTORS COMPANY

    Install the NEW clutch master cylinder reservoir hose (2) to the reservoir tank and the clutch master cylinder.

  2. Connect the clutch master cylinder reservoir hose to the master cylinder reservoir retainer (1).
  3. Bleed the hydraulic clutch system. Refer to Hydraulic Clutch System Bleeding .
scientia non olet · About LEMON Manuals