Rear Seat Belt Retractor Replacement

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Seat Belt Retractor

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
WARNING: Refer to SIR Warning . Preliminary Procedures Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling . Remove the rear seat cushion. Remove the quarter window trim finish panel. Refer to Quarter Window Trim Finish Panel Replacement . Remove the quarter lower rear trim panel. Refer to Quarter Lower Rear Trim Panel Replacement .
1	Rear Seat Belt Anchor Bolt CAUTION: Refer to Fastener Caution . Tighten 40 N.m (30 lb ft)
2	Rear Seat Belt Retractor Bolt Tighten 40 N.m (30 lb ft)
3	Rear Seat Belt Retractor Assembly