Installation Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Assemble the New positive crankcase ventilation valves (3) with the air cleaner outlet duct (1) and New positive crankcase ventilation tube (2).

Fig 1: Positive Crankcase Ventilation (PCV) Tube Assembly Components
Courtesy of GENERAL MOTORS COMPANY
Install the air cleaner outlet duct assembly (1, 2, 3) with positive crankcase ventilation tube and valve to the engine.

Fig 2: Positive Crankcase Ventilation (PCV) Tube Assembly Components
Courtesy of GENERAL MOTORS COMPANY
Using EN-50956 tamper proof drive bit tighten bolts (4) to 10 N.m (89 lb in).
Position the air cleaner outlet duct (1) in place and tighten the clamp (2) on the engine.

Fig 3: Air Cleaner Outlet Duct And Clamp
Courtesy of GENERAL MOTORS COMPANY
Install the positive crankcase ventilation tube (front). Refer to Positive Crankcase Ventilation Tube Replacement (L5Q (Front)) Positive Crankcase Ventilation Tube Replacement (L5Q (Rear)) .