Instrument Panel Trim Plate Applique Replacement (Driver)

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Instrument Panel Trim Plate Applique At Driver Side

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the instrument panel outer trim cover - driver side. Refer to Instrument Panel Outer Trim Cover Replacement (With C99) Instrument Panel Outer Trim Cover Replacement (Without C99) . Remove the instrument panel knee bolster. Refer to Instrument Panel Knee Bolster Replacement . Remove the instrument panel center trim plate applique. Refer to Instrument Panel Center Trim Plate Applique Replacement .
1	Instrument Panel Trim Plate Applique Bolt (Qty: 1) CAUTION: Refer to Fastener Caution .
2	Instrument Panel Trim Plate Applique Clip (Qty: 4)
3	Instrument Panel Trim Plate Applique Assembly Procedure Use a flat-bladed plastic tool to remove.