Instrument Panel Knee Bolster Replacement

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Instrument Panel Knee Bolster

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Remove the instrument panel outer trim cover - left side. Refer to Instrument Panel Outer Trim Cover Replacement (With C99) Instrument Panel Outer Trim Cover Replacement (Without C99) . Remove the instrument panel fuse block access hole cover. Refer to Instrument Panel Fuse Block Access Hole Cover Replacement .
1	Instrument Panel Knee Bolster Fastener (Qty: 3) CAUTION: Refer to Fastener Caution .
2	Instrument Panel Knee Bolster Clip (Qty: 5)
3	Instrument Panel Knee Bolster Assembly Procedure Detach the electrical connector from the instrument panel knee bolster through the fuse block access hole opening.