LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark LT, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Engine Controls And Fuel - 1.4L (LV7) - Repair Instructions) >> Repair Instructions >> Air Cleaner Outlet Duct Replacement (LV7) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2017 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement (LV7) .
  2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  3. Loosen the air cleaner outlet duct clamp (2) and position the air cleaner outlet duct (1) away from the engine.
    Fig 1: Air Cleaner Outlet Duct And Clamp
    GM4210128Courtesy of GENERAL MOTORS COMPANY
  4. Using a suitable tool, cut a slot in the tamper-resistant positive crankcase ventilation (PCV) bolt heads (1) and remove with a flat-bladed tool. Discard bolts (1).
    Fig 2: Positive Crankcase Ventilation (PCV) Tube Assembly Components
    GM4210130Courtesy of GENERAL MOTORS COMPANY
  5. Remove the air cleaner outlet duct assembly (2) with the positive crankcase ventilation tube and valves from the engine. Discard the assembly (2).
scientia non olet · About LEMON Manuals