LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Spark ACTIV, Automatic CVT Trans >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bumpers And Fascias >> Repair Instructions >> Front Bumper Fascia Replacement

Front Bumper Fascia Replacement

GM4110695
Callout Component Name

Preliminary Procedures

  1. Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
  2. Remove the front compartment insulator. Refer to Front Compartment Insulator Replacement .
  3. Remove the head lamp. Refer to Headlamp Replacement (Projection/SBV)Headlamp Replacement (BASE/SBM) .
1 Front Bumper Fascia Side Bolt (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
2.5 N.m (22 lb in)
2 Front Bumper Fascia Bolt (Qty: 2)
Tighten 
6 N.m (53 lb in)
3 Front Bumper Fascia Retainer (Qty: 2)
4 Front Bumper Fascia

Procedure

  1. Unclip from front bumper fascia guides.
  2. Pull forward to remove the front bumper fascia.
  3. Disconnect any electrical connectors.
  4. Transfer parts as needed.
scientia non olet · About LEMON Manuals