Headlamp Replacement (Projection/SBV)

GM4111471

Callout

Component Name

1

Headlamp Screw (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Tighten
2.5 N.m (22 lb in)

2

Headlamp Assembly

Procedure

Pull the headlamp assembly forward far enough to access the electrical connection.
Disconnect the headlamp electrical connector from the forward lamp harness connector.
Remove the headlamp assembly.
Aim the headlamps after installation. Refer to Headlamp Aiming (SAE) Headlamp Aiming (ECE) .