Rear Bumper Impact Bar Replacement
| Callout | Component Name |
|---|---|
| Preliminary Procedure Rear Bumper Fascia Replacement (Single Tail Pipe) Rear Bumper Fascia Replacement (Dual Tail Pipe) |
|
| 1 | Rear Bumper Impact Bar Nut [4x]
CAUTION:
Refer to FASTENER CAUTION . Tighten 58 N.m (43 lb ft) |
| 2 | Rear Bumper Impact Bar Bolt[4x] Tighten 58 N.m (43 lb ft)
NOTE:
When removing the 2 left hand bolts, support may be needed for the muffler. |
| 3 | Rear Bumper Impact Bar Procedure Transfer components as necessary. |