Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the battery box. Refer to Battery Tray Replacement .
- Prior to removing the mount, mark mount to transmission, mount to body interfaces and fasteners to mount interfaces using spray paint or a marker for correct positioning during installation.
- Install the engine support fixture. Refer to Engine Support Fixture .
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the front transmission mount through bolt (1).
Remove the rear transmission mount through bolt (1).
- Lower the vehicle.
Remove the transmission mount to transmission bolts.
Using the engine support, lower the transmission enough to provide clearance for the left transmission mount.
- Remove the transmission mount to frame rail bolts (2).
- Remove the left transmission mount (1).