LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Impala Premier, Gas >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Engine Coolant Fan Shroud Replacement (LFX)

Engine Coolant Fan Shroud Replacement (LFX)

GM2911290
Callout Component Name

Preliminary Procedures

  1. Reposition the front end upper tie bar to gain access to the engine coolant fan shroud. Refer to Front End Upper Tie Bar Replacement .
  2. Disconnect the engine coolant fan motor connectors.
  3. Remove the electrical wiring harness from the engine coolant fan shroud and reposition out of the way.
  4. Reposition the transmission fluid cooler pipes.
1 Engine Coolant Fan Shroud Fastener (Qty: 2)
CAUTION:

Refer to Fastener Caution .
2 Engine Coolant Fan Shroud

Procedure

  1. Remove the engine coolant fan shroud metal retaining clips from the radiator.
  2. Transfer all necessary parts.
scientia non olet · About LEMON Manuals