Camshaft Position Actuator Exhaust Solenoid Valve Replacement

WARNING: This page is about a different variant/trim than selected.

Fig 1: Camshaft Position Actuator Exhaust Solenoid Valve

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Intake Manifold Cover Replacement Disconnect the electrical connector.
1	Camshaft Position Actuator Exhaust Solenoid Valve Fastener CAUTION: Refer to Fastener Caution . Tighten 10 N.m (89 lb in)
2	Camshaft Position Actuator Exhaust Solenoid Valve Procedure If reusing the OLD solenoid valve, install a NEW seal. NOTE: A NEW solenoid valve will come with a NEW seal.

Callout

Component Name

Preliminary Procedures

Camshaft Position Actuator Exhaust Solenoid Valve Fastener

CAUTION:

Tighten
10 N.m (89 lb in)

Camshaft Position Actuator Exhaust Solenoid Valve
Procedure
If reusing the OLD solenoid valve, install a NEW seal.

NOTE:

A NEW solenoid valve will come with a NEW seal.