LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Mechanical - 1.6L (LH7) Diesel) >> Repair Instructions - On Vehicle >> Engine Mount Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Remove Intake Manifold Cover. Refer to Intake Manifold Cover Replacement 
  2. Remove Air Cleaner Assembly. Refer to Air Cleaner Assembly Replacement
  3. Install Engine Support Fixture. Refer to Engine Support Fixture 
    4. Fig 1: Engine Mount Brace And Bolts
    GM4665470Courtesy of GENERAL MOTORS COMPANY
  4. Remove Engine Mount Brace Bolts (1) (Qty: 2)
  5. Remove Engine Mount Brace (2)
    6. Fig 2: Engine Mount And Bolts
    GM4847172Courtesy of GENERAL MOTORS COMPANY
  6. Remove Engine Mount Bolts (1) (Qty: 2)
  7. Remove and DISCARD Engine Mount Engine Side Bolt (2)
  8. Remove and DISCARD Engine Mount Engine Side Bolt (3)
  9. Remove Engine Mount (4)
scientia non olet · About LEMON Manuals