Conditions for Running the DTC

P2006

• DTC P0071, P0072, P0073, P0074, P0117, P0118, P0119, P200A, P2008, P2009, P2010, P2015, P2016, P2017 or P20F8 is not set.
• The engine is running.
• The battery voltage is greater than 11 V.
• The ambient air temperature is warmer than -7°C (19°F).
• The engine coolant temperature (ECT) is warmer than 60°C (140°F).
• The actuator is commanded On for greater than 30 s.
• The actuator command is steady at less than 50% for greater than 50 s.
• The DTC runs continuously when the above conditions are met.

P200A

• DTC P0117, P0118, P0119, P2008, P2009, P2010, P2015, P2016 or P2017 is not set.
• The battery voltage is greater than 11 V.
• The engine coolant temperature (ECT) is warmer than 60°C (140°F).
• The actuator is commanded On for greater than 30 s.
• The DTC runs once per trip when the ignition is switched Off.