Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Ignition On.
- Verify with a scan tool that DTC P0090, P0091, P0092, P0689, P0690 or P1682, is not set.
- If DTC P0090, P0091, P0092, P0689, P0690 or P1682 is set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle .
- Go to next step: If DTC P0090, P0091, P0092, P0689, P0690 or P1682 is not set
- If DTC P0090, P0091, P0092, P0689, P0690 or P1682 is set
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed in the Freeze Frame/Failure Records data.
- Verify the DTC does not set.
- If DTC P163A is set
Refer to Circuit/System Testing
- Go to next step: If DTC P163A is not set
- If DTC P163A is set
- All OK.