LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Controls And Fuel - 1.6L (LH7) Diesel - Diagnostic Information And Procedures (P040B - P204D)) >> Diagnostic Information And Procedures >> DTC P142B, P142C, P142D, P142E, P142F, P1435 Or P1436: Particulate Matter Sensor Control Module Temperature >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Ignition On.

    Verify DTC P1474, P1475, P1476, P1477, P1478, P16D7, P16D8, P16D9, P24B0, P24B1, P24B3, P24B5, P24B6, P24D0 or U02A3 is not set

    • Go to next step: If none of the DTCs are set 
  2. Verify DTC P142B, P142C, P142D, P142E, P142F, P1435 or P1436 is not set.
    • If the DTC sets 

      Replace the B136 Exhaust Particulate Matter Sensor.

    • Go to next step: If the DTC does not set 
  3. All OK.