Circuit/System Verification
WARNING: This page is about a different variant/trim than selected.
- Verify that DTC P003A, P0070, P0071, P0072, P0073, P0074, P00C7, P00E9, P00EA, P00EB, P00EC, P0100, P0101, P0102, P0103, P010B, P010C, P010D, P0106, P0107, P0108, P0111, P0112, P0113, P0114, P0116, P0117, P0118, P0119, P0128, P014D, P014C, P0191, P0192, P0193, P0194, P0201, P0202, P0203, P0204, P0205, P0206, P0207, P0208, P020A, P020B, P020C, P020D, P020E, P020F, P0216, P021A, P021B, P0234, P0261, P0262, P0264, P0265, P0267, P0268, P0270, P0271, P0273, P0274, P0276, P0277, P0279, P0280, P0282, P0283, P0299, P02EE, P02EF, P02F0, P02F1, P02F2, P02F3, P02F4, P02F5, P0405, P0406, P041B, P041C, P041D, P041E, P044C, P044D, P049D, P049E, P0502, P0503, P0545, P0546, P062B, P062D, P0722, P0723, P111E, P113B, P113C, P113D, P113E, P113F, P115E, P115F, P1160, P116A, P116B, P116C, P116D, P116E, P116F, P118E, P118F, P1192, P1193, P1194, P1197, P1198, P119A, P119B, P119C, P11C5, P11C6, P11DB, P11DD, P1248, P1249, P124A, P124B, P124C, P124D, P124E, P124F, P126A, P12AF, P12B0, P12B1, P12B2, P1427, P1428, P16B0, P16B1, P16B2, P2004, P2006, P2008, P2009, P200A, P2010, P2015, P2016, P2017, P201B, P201D, P2032, P2033, P2081, P2080, P2084, P2085, P20F8, P2147, P2148, P2150, P2151, P2153, P2154, P2156, P2157, P2200, P2205, P2206, P2207, P2208, P2209, P220A, P2210, P2211, P2227, P2228, P2229, P2230, P2263, P226B, P2297, P242B, P242C, P242D, P242E, P2452, P2453, P2454, P2455, P2456, P246F, P2470, P2471, P2472, P2481, P2482, P2483, P2484, P2564, P2565, P2627, P2628, P2A00 or U029D, is not set.
- If any of the DTCs are set
Refer to Diagnostic Trouble Code (DTC) List - Vehicle for further diagnosis.
- Go to next step: If none of the DTC are set
- If any of the DTCs are set
- Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
- Verify that DTC P118E, P118F or P1196 does not set.
- If the DTC sets
Refer to Circuit/System Testing.
- Go to next step: If the DTC does not set
- If the DTC sets
- All OK.