LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2018 >> Equinox L >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 19 (Engine Controls And Fuel - 1.6L (LH7) Diesel - Diagnostic Information And Procedures (P040B - P204D)) >> Diagnostic Information And Procedures >> DTC P057B, P057C, P057D, Or P057E: Brake Pedal Position Sensor >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P057B 

ECM detects the BPP sensor signal is stuck in a range for greater than 1 s.

P057C 

ECM detects the BPP sensor voltage is less than 0.25 V greater than 1 s.

P057D 

ECM detects the BPP sensor voltage is greater than 4.75 V greater than 1 s.

P057E 

ECM detects the BPP sensor value varies greater than a calibrated value.

scientia non olet · About LEMON Manuals