Circuit/System Testing
WARNING: This page is about a different variant/trim than selected.
- Verify that no cylinders have low compression and no fuel injector nozzles are clogged, stuck open, or stuck closed. Perform the Circuit/System Testing of the Fuel Injector Balance Test.
Refer to Fuel Injector Balance Test with Scan Tool .
- If a fuel injector nozzle is clogged, stuck open, or stuck closed
Replace the appropriate Q17 Fuel Injector.
- If one or more of the cylinders indicate low compression
Repair as necessary.
- Go to next step: If all cylinders indicate normal compression and no fuel injector nozzles are clogged, stuck open, or stuck closed
- If a fuel injector nozzle is clogged, stuck open, or stuck closed
- All OK.
NOTE:
Only perform the Circuit/System Testing portion of the Fuel Injector Balance Test.