Removal Procedure
WARNING: This page is about a different variant/trim than selected.
- Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement
- Remove Exhaust Gas Recirculation Cooler Temperature Sensor (2) @ Exhaust Manifold (3)
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
- Disconnect Electrical Connector (1)
- Unclip Exhaust Gas Recirculation Cooler Temperature Sensor Electrical Connector (2) @ Wiring Harness Clip (3)
- Remove Exhaust Gas Recirculation Cooler Temperature Sensor (2)
Fig 2: Exhaust Gas Recirculation Cooler Temperature Sensor, Electrical Connector And Wiring Harness Clip